1976 Gibson Explorer Limited Edition Natural

Neck Width

1st - .92"

12th - 1.04"

The guitar has aged nicely and has moderate play wear for its age. The finish has scratches, dings, and chips throughout, particularly around the edges of the headstock and body. 

It has a small crack in the headstock underneath the low E tuner has been repaired -a dent in the neck at the fifth fret has been filled with laquer and polished smooth -the neck joint has been repaired - see pictures -a hole has been plugged on the side of the upper wing -an extra strap button hole in the back of the body behind the upper shoulder has been filled and touched up -an extra strap button hole has been drilled next to the bottom strap button -strap locks have been installed

Finish Details:	Original
Body Material:	Mahogany
Body Details:	Solid mahogany body -a hole has been plugged on the side of the upper wing -an extra strap button hole in the back of the body behind the upper shoulder has been filled and touched up -an extra strap button hole has been drilled next to the bottom strap button
Neck Material:	Mahogany
Fingerboard Material:	Rosewood
Neck Profile:	Thick C
Neck Thickness (IN):	1st - 0.92" 12th - 1.04"
Fingerboard Radius:	12.00"
Nut Width:	1-11/16"
Scale Length:	24 3/4"
Neck Details:	Glossy, one-piece mahogany neck with unbound rosewood fingerboard and pearloid dot inlays -neck joint has been repaired -there is a drop fill on the back of the neck at the fifth fret
Electronics:	Original Gibson "tar-back" humbuckers, pots with 1976 codes, and wiring harness. Controls include independent volume pots for each pickup and a master tone pot.
Pickup Measurements:	Neck - 5.29kΩ Bridge - 7.53kΩ
Hardware:	Original -strap locks have been installed